canada1200b024026.gif
Crystal Electronics Inc.
E-mail: info@crystalelectronics.ca
Home
Cleaners
Company
Contact
Warranty
Repairs
Sonifiers
Chemistry

Ultrasonic Tanks and Power Supplies

S7000 Power Supplies

Branson's Series 7000 solid state ultrasonic power supplies combine the economy of standardization with the flexibility of modular design. Used on a simple cleaning tank or with immersible transducers, Series 7000 Ultrasonic Power Supplies will deliver precision cleaning quickly, consistently, and be cost effective.

MODULARITY FOR SYSTEM FLEXIBILITY

Individual S-7000 power supplies are housed in their own portable enclosures and connected by RF cable to either a Branson tank or immersible transducer pack. In combination, these components form a complete, specialized S-7000 ultrasonic cleaning system, offering the economy of standardization with the flexibility of modular design.

Internal modularity of the Series 7000 power supply allows individual units to power 6 to 48 transducers (in multiples of 6) in your choice of 25 or 40 kHz output frequencies.

STANDARD FEATURES

  • Electrical System -
    All Series 7000 power supplies meet CSA Code and are equipped with RFI filters to meet  radio frequency interference standards. Each power supply is fuse-protected against malfunctions and line voltage surges. These power supplies are available with operating voltages to meet most requirements.
  • Simple operation -
    Power supply has on/off switch with pilot light.
  • Broad emperature range -
    Operates in ambient temperatures from 35 F to 110F (1.70C to 43C).
  • Air-cooled -
    Cooling fan permits continuous power supply operation.

 

S7000 Ultrasonic Tanks

CLEANING TANKS
Branson manufactures five standard size transducerized tanks that range from a 2.6 to a 41 gallon capacity (1 0 to 155 liters). 

  • All have drains for easy cleaning.
  • Type 316L stainless steel construction throughout permits the use of alkaline, mildly acidic or neutral aqueous solutions. 
  • Branson tanks are available with or without integral heaters.
  •  The heated models maintain solution temperatures from ambient to 180F (82C) thermostatically.
  • All models are available with a stainless steel parts basket and/or tank cover.

STANDARD FEATURES
Bottom-mounted positive drain connection.
Fully shielded internal components.

OPTIONAL ACCESSORIES
 
Stainless steel parts basket for handling convenience.
Stainless steel tank cover.

NUMBERING SYSTEM
Each Branson  tank has a model number which contains important information to guide the selection of a properly rated companion power supply.

For example: SH1012-40-12
This model number, stamped on the tank nameplate, indicates whether the tank has a heater (S = unheated, SH = heated), the width of the tank in inches, left to right (1 0"), the length of the tank in inches, front to back (1 2"), the operating frequency (40 kHz) and the number of attached piezo transducer elements (1 2).

POWER SUPPLY SELECTION FOR CLEANING TANKS
To select the correct power supply for your cleaning tank, add the total number of transducer elements involved by using the information from the model number as explained. Then select a power supply whose last two numbers exactly match the number of transducer elements by referring to the power supply specification chart.

 

S7000 Ultrasonic Tanks

 

Model 1012-12

Model 1216-18

Model 1620-24

Model 2024-36

Working Dimensions:

10"W x 12"L x 10"D

12"W x 16"L x 12"D

16"W x 20"L x 16"D

20"W x 24"L x 20"D

Overall Dimensions*:

14"W x 16"L x 16H"

16"W x 20"L x 18"H

20"W x 24"L x 22"H

24"W x 28"L x 26"H

Heater Power:

1000 Watts

2000 Watts

3000 Watts

3000 Watts

Power Requirements:

120V/1p/8.5A

230V/1p/8.7A

230V/1p/13A

230V/1p/13A

* includes 7/8" horizontal flange on all four sides

S7000 Power Supplies

Model Frequency Trans-
ducers
Voltage
Requirements
Ave. Output Power
S7025-12
S7040-12
25 kHz
40 kHz
12 120 V or 220 V +/-15% 500 Watts
S7025-18
S7040-18
25 kHz
40 kHz
18 220 V +/- 15% 750 Watts
S7025-24
S7040-24
25 kHz
40 kHz
24 220 V +/- 15% 1000 Watts
S7025-36
S7040-36
25 kHz
40 kHz
36 220 V +/- 15% 1500 Watts
S7025-48
S7040-48
25 kHz
40 kHz
48 220 V +/- 15% 2000 Watts

All units operate at either 50/60 Hz

 
 


 
canada1200b031002.gif
canada1200b031001.gif